115 Protokolle, nativ unterstützt

Airzone is a control framework for ducted air conditioning systems which allows for the control of several zones independently. This I/O server provides support for this Airzone systems: INNOBUS, FLEXA, ANTREE and CEN.

Felma’s Alert5 is a supervisor system that can control anti-intrusion, fire prevention, access control and TVCC systems.

The APC by Schneider Electric Rack Power Distribution Unit (PDU) may be used as a stand-alone, network- manageable power distribution device or up to four devices can be connected together using one network connection. The HSYCO RACKPDU driver supports the AP88XX and AP78XXB Metered models.

HSYCO supports Arduino through an open source library installed in the Arduino IDE. This library implements a bidirectional communication protocol with HSYCO. A sketch in Arduino that allows HSYCO to directly read and control any of the digital and analog pins on any Arduino board is only a few lines long, and is provided as a built-in example in the HSYCO library. HSYCO supports Arduino Uno, Arduino Ethernet, Arduino Due and other compatible boards.

Aritech Interlogix FP2000 is a multi-area fire panel. The integration with HSYCO can be accomplished via direct control through the RS232 port on the panel.

Aritech CSx75 is a multi-area security system. The integration with HSYCO can be accomplished via direct control through the RS-232 port on its panel.

Arteco Everywhere is a general purpose digital input-output Ethernet controller. The integration with HSYCO can be accomplished with a TCP/IP network connection.

The ARTECOOC I/O Server can be used to interface HSYCO and the Arteco Next platform using the Arteco Open Connector SDK protocol.

Aton AH66T is a multi-zone audio system. The integration with HSYCO can be accomplished via direct control through the RS232 port on the module.

Aritech ATS panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the serial module.

Avigilon Control Center (ACC) 7 is a video management software that can be integrated in HSYCO with a TCP/IP connection. The current release of the I/O Server has been tested with the Avigilon Control Center WebEndpoint.

Axis cameras HTTP MJPG Stream and HTTP API

HSYCO can be configured as a BACnet/IP client device. conforms to a functional subset of the BACnet protocol, as defined in ANSI/ASHRAE Standard 135-2010.

BACnet is a protocol developed by ASHRAE for building automation and control networking, specifically designed to meet the communication needs of building automation and control systems for applications such as heating, ventilating, air-conditioning control, lighting control, access control and fire detection systems. HSYCO conforms to a functional subset of the BACnet protocol, as defined in ANSI/ASHRAE Standard 135-2010. HSYCO can be configured as a BACnet/IP server device.

The Bentel KYO320 is an advanced, multi-area security system integrated HSYCO. The integration with HSYCO can be accomplished through the standard RS-232 port on the KYO320’s motherboard.

The BOSCH FPA-5000 is a modular fire panel system. The integration with HSYCO can be accomplished via direct control through the RS-232 communication module.

The Bosch MAP panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via Ethernet connection.

This driver allows the supervision of CLE Automazioni hotel management system.

Comelit Logifire 41CPE118 and 41CPE212 are addressable fire detection panels, with up to 8 loops of 250 devices each and up to 200 zones. The integration with HSYCO is accomplished via a standard Modbus TCP/IP connection. The ComelitFire I/O Server was developed following the Comelit Modbus register documentation for Logifire 41CPE118 and 41CPE212, version 1.10.1, and tested with panel firmware 1.1.9.

The Contatto system is DUEMMEGI’s proprietary bus architecture for building automation. HSYCO fully integrates with this system through the MCP control and gateway module, and its FXP-XT serial communication protocol.

The Cradlepoint driver for HSYCO allows you to monitor the real-time status of the Cradlepoint IBR6xx series of routers. The integration with HSYCO can be accomplished with a TCP/IP network connection

Dahua cameras HTTP MJPG Stream

The DAHUAALARMHUB I/O Server allows HSYCO to receive alarms from and send commands to the Dahua Alarm Hub 2 security panel. Communication between HSYCO and the panel requires the SIA (Security Industry Association) protocol to be configured on the panel.

Daikin air-conditioning systems in combination with the intelligent Touch Controller (iTC) or the intelligent Touch Manager (iTM) allow for remote control and supervision, via Ethernet communication, of the whole framework. This driver is compatible with iTC and iTM modules respectively compliant with the DCS007A51 and DCM007A51 http protocol.

The DAIKINRC I/O Server is compatible with the Daikin room air conditioner series CTXM, ATXM and FXTM units that can be fitted with the Daikin wireless LAN adapter (BRP06xxx) and are supported by the Daikin Controller iOS and Android app.

Tridonic is a lighting system based on the DALI bus technology. HSYCO integrates this system and communicates with it through the DALI SCI2 interface module or DALI interface RS232 PS/S interface module and its communication protocol. The integration relies on a direct connection between the DALI SCI2 or DALI RS232 PS/S interface and HSYCO server’s RS-232 serial port, or through a TCP/IP to serial port gateway.

DEA XENSITY is a Point ID intrusion detection system using special piezoelectric sensors for the protection of doors, windows, glass surfaces, security grilles and walls. This driver is compatible with the following controllers: Xensity128, Xensity64, Xensity32. Make sure to install the latest available firmware.

Heos by Denon comprises a set of HiFi audio systems integrated with HSYCO via WiFi or Ethernet connection. A single HEOS I/O Server controls all the devices connected to the local network. The driver has been tested on firmware version 1.289.95 of the HEOS devices.

DETNOV are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation MODBUS REGISTERS FOR DETNOV ADDRESSABLE SYSTEM VERSION 1.11 ENG. This driver has been tested on DETNOV CAD-150-2 panel. (Should be compatible with CAD 150-1, CAD 150-2, CAD 150-8, CAD 150-8+, CAD 150-4)

HSYCO can control any DMX-512 standard bus via Enttec DMX USB PRO (USB) or KISSBOX (TCP/IP)

The Domino system is DUEMMEGI’s proprietary bus architecture for home automation. HSYCO fully integrates with this system through the DFCP or DFCP4 control and gateway module, and its FXP-XT serial communication protocol.

DUELUX is a lighting system based on the DALI-2 industry-standard protocol for lighting control. HSYCO integrates this system and communicates with it through the DLCP gateway module via a TCP/IP connection.

EL.MO. security panels (ETR, Pregio, Vidomo, Proxima and Titania) are multi-area detection systems. The integration with HSYCO can be accomplished via direct control through the RS232 port on the panel. (This driver is also compatible with IESS ETR series)

The Elsner P03/3-MODBUS is a solid-state weather station with a standard Modbus RTU slave interface.

This I/O Server control SEIKO EPSON projectors which include a wide range of multi-source projectors remotely controllable via Ethernet via ESC/VP21 protocol.

ESSER 8xxx/IQ8/FlexES are multi-area fire panels. The integration with HSYCO can be accomplished using IBOX Modbus Server – ESSER gateway, a TCP/IP modbus interface.

IP cameras can be integrated via HTTP MJPG Stream

Exo Sense Pi is a multi-sensor module with a Raspberry Pi 4 computing core and a wide range of connectivity options.

Oracle’s FIAS (Fidelio Interface Application Specification) is a protocol specification used by different hospitality PMS systems to exchange data. This driver interprets check-in and check-out events and optionally exposes all received raw FIAS messages to be used in custom logic.

Foscas cameras via HTTP MJPG Stream and HTTP API

Ganz cameras via HTTP MJPG Stream and HTTP API

The GiacoKlima bus system equipped with the KM203 network controller allows for remote control and supervision, via Serial communication, of the whole heating/cooling framework.

This driver allows for the use of Google Calendar as a scheduler.

The GSM I/O Server provides services for sending and receiving SMSs and events generation for incoming calls via GSM modem. The integration with HSYCO can be accomplished via direct control through the RS-232 port.

Guardall QX32i, PX80 and PX500 are multi-area security systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the panel. The I/O Server supports QX32i, PX80 and PX500 Guardall units with software version 4.33

Hesa Quaranta panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the board.

The HID Edge Solo are single-door IP access control solutions. This I/O Server allows the integration of HID Edge Solo devices by using a TCP/IP connection.

Hikvision cameras via HTTP MJPG Stream and HTTP API

The Honeywell Galaxy Dimension panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via RS-232 serial connection and has been tested with firmware version 6.80.

The HWGIO I/O Server is compatibile with Controller2, PortBox, ER84 and ER88. The integration with HSYCO can be accomplished with a TCP/IP network connection.

The HWGMONITOR I/O Server supports the following monitoring devices from HW group: Damocles, Poseidon STE, WLD. The integration with HSYCO can be accomplished with a TCP/IP network connection

Integrated Control Technology (ICT) is an award-winning global manufacturer of security solutions. For more than 20 years, ICT has led the way with their unified systems for access control, intrusion detection, and building automation. Headquartered in Auckland, New Zealand, ICT supports customers with sales, service, support, and training from local teams in the USA, Canada, EMEA, and APAC. The integration with HSYCO can be accomplished with a TCP/IP network connection.

This I/O Server implements two-way communication with the Webhooks service of IFTTT, allowing HSYCO to trigger applets in IFTTT and, the other way around, to receive notifications and data from applets.

HSYCO integrates IKEA’s DIRIGERA hub, a smart home controller designed to unify control over IKEA smart devices such as lights, outlets, blinds, motion sensors, and more. Communication is conducted over the local network without requiring access to the IKEA cloud.

The integration enables HSYCO to monitor and control devices configured in the DIRIGERA hub, using a local API uncovered through reverse engineering. The HUB setup must be completed via the IKEA Home Smart App before use with HSYCO.

INIM PREVIDIA are multi-zone fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This driver has been tested on INIM PREVIDIA Ultra, Max and Compact panels.

INIM PRIME are multi-zone security panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation: “Modbus PRIME-3.00”

Inim SmartLiving panels (515, 1050, 10100) are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the board.

Iono Pi is a versatile I/O module that combines several digital and analog input lines, power relay outputs and support for standard interfaces, typical of modern PLCs, with the powerful computing core of the Raspberry Pi. Iono Pi has a standard Wiegand interface.

Iono Pi is a versatile I/O module that combines several digital and analog input lines, power relay outputs and support for standard interfaces, typical of modern PLCs, with the powerful computing core of the Raspberry Pi. Iono Pi has a standard Wiegand interface.

IRTRANS is a ethernet or Wi-Fi device than learns the codes of remote controls, stores them in a database and sends them. HSYCO can receive and send IR commands using IRTRANS.

KILSEN KFP-A are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation P/N 00-3243-505-1603-01 • ISS 14DEC15 This driver is also compatible with Aritech 2x series.

The KNX I/O Server provides for the control of a KNX installation compliant with the KNX Standard version 2.0. The communication between HSYCO and the KNX network must employ a KNXnet/IP gateway supporting the Tunneling service.

The KSENIA lares 16IP/48IP/128IP are multi-area security systems. The integration with HSYCO can be accomplished via direct control through Ethernet connection. The I/O Server has been tested on units with product revision 1.6.1247, web server firmware version 1.0.0.15 and HTML version 1.1.33 and 1.1.44.

The KSENIA lares 4.0 panel is a multi-area security system. The integration with HSYCO can be accomplished via direct control through Ethernet connection. The I/O Server has been tested on unit with firmware version 1.72.2 and web server version 1.32.7. Actually this driver runs only in HTTP mode (port 80 is set by default).

The LoRaWAN I/O Server implements both a LoRaWAN Network and Application servers for the integration of a LoRaWAN network.

MasterBus is a proprietary communication protocol used in a wide range of products from Mastervolt. It can be interfaced via the MasterBus Modbus Interface

Mews is an Hotel management software that can be integrated in HSYCO with an API connection. The current release of the I/O Server has been tested with the Mews Web API.

The Mitsubishi I/O Server can control air-conditioning devices connected to a Mitsubishi M-NET bus via a centralized controller and the Ethernet LAN.

Mobotix cameras supporting HTTP Mjpg Stream

HSYCO supports both Modbus TCP and Modbus RTU, acting as a Modbus master in both cases. HSYCO’s Modbus TCP SERVER I/O Server implements a Modbus TCP/IP server, allowing external Modbus clients to connect to HSYCO and perform any standard Modbus function.

HSYCO can act as an MQTT client (publisher/subscriber) or as an MQTT broker. It fully supports MQTT version 3.1.1.

MyHome is a proprietary bus system for home automation developed by BTicino. HSYCO fully integrates with MyHome using the OpenWebNet (OWN) protocol.

This driver can read the status and send control commands to a NETIO power socket, using the HTTP JSON API protocol.

This driver can read status and control Netatmo smart radiator valves using HTTPS protocol.

NetworX is a multi-area security system. The integration with HSYCO can be accomplished via direct control through their serial or ethernet interfaces.

HSYCO acts as an MQTT client (publisher/subscriber) for HSYCO and establishes a connection with Niko Connected Controller in order to control Niko actions associated with lights and dimmers

The NMEA I/O Server implements a basic NMEA 0183 TCP client that connects to a NMEA 0183 source and receives all sentences, checking and discarding the checksum of valid messages, and ignoring invalid messages.

The Notifier AM-2000, AM-4000 and AM-6000 are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus RTU slave interface via SIB600OEM MODBUS module.

The Notifier AM-2000, AM-4000 and AM-6000 are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus RTU slave interface via SIB600OEM MODBUS module.

NuVo Grand Concerto and Essentia E6G are multi-source, multi-zone audio distribution systems that may be integrated to work with external control systems and servers. The integration with HSYCO can be accomplished via direct control through the RS232 port.

Opera Cloud is an hotel management software that can be integrated in HSYCO with an API connection. The current release of the I/O Server has been tested with the Opera Hospitality API

PARADOX EVO48, EVO192 and EVOHD are advanced, multi-area security systems integrated with a variety of wired and wireless sensors. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the PRT3 Integration Module.

HSYCO integrates the Philips Hue wireless bulbs through their bridge device connected to the local network.

The Aurora/ABB Power-One inverters allow for remote supervision of the system providing with several measurement data. The integration with HSYCO can be accomplished with a serial RS485 – TCP/IP gateway.

RayControl 30 is the control unit for the FCC Planterm temperature control system. The integration with HSYCO can be accomplished via a standard Modbus RTU connection.

The Optex REDSCAN is a laser scan detector that can detect a moving object’s size, speed, and distance with high-reliability. The integration with HSYCO can be accomplished via direct control through Ethernet connection. The I/O Server complies with the Optex REDSCAN Protocol v1.71 and has been tested on firmware version 7.3.0.

Samsung cameras supporting HTTP Mjpg Stream

The Satel INTEGRA series comprises a variety of multi-area security systems. The integration with HSYCO can be accomplished via direct control through Ethernet connection. The ethernet connection is possibile via the interface ETHM-1 PLUS

The SD3 HEPHAIS 1600 is a multi-zones fire panel. The integration with HSYCO can be accomplished via a standard Modbus RTU slave interface. This I/O Server requires HEPHAIS 1600 with protocol modbus JBUS V0.13.

Sfera Labs products can be integrated with dedicated I/O servers or via Modbus RTU.

HSYCO integrates Allterco’s Shelly devices, a comprehensive range of WiFi-enabled smart home devices operating on 2.4GHz with IPv4 support. Each device offers a documented API.

The **SIACLIENT** driver implements a SIA (Security Industry Association protocol) client, following the **DC-09** specification. It has been developed and tested with **HSYCO** acting as a **SIA DC-09 client**, sending messages to a SIA-compatible receiver. Compatibility with other SIA protocol variants is possible but not guaranteed.

The SIASERVER driver implements a SIA (Security Industry Association protocol) server, specifically following the **DC-09** specification. It has been developed and tested with **HSYCO** acting as a **SIA DC-09 server**, though compatibility with other SIA protocol variants is possible but not guaranteed.

Siemens / Vanderbilt is a family of security panels compatible with the control protocol EDP (Vanderbilt/Siemens series 4000, 5000 and 6000). This driver has been developed following the EDP protocol specification rev 2.2, 2012-11-12. The integration with HSYCO can be accomplished with a TCP/IP network connection.

Sigfox is a global network operator that builds wireless networks to connect low-power radio devices. This driver allows you to communicate with Sigfox Cloud in order to retrieve messages and status updates collected from devices.

The HSYCO SIP I/O Server allows HSYCO to control standard VoIP client software (also called soft-phones), in order to integrate telephony features in HSYCO applications. The SIP I/O Server also works as a basic IVR (interactive voice response) system, allowing HSYCO to interact with users via the standard telephony system through the use of voice and DTMF tones input on the phone’s keypad.

The SMTPSERVER I/O Server implements a very basic Simple Mail Transfer Protocol (SMTP) server based on a subset of the RFC 821 standard.

Sonos comprises a set of HiFi audio systems integrated with HSYCO via WiFi or Ethernet connection. A single SONOS I/O Server controls all the devices connected to the local network.

The SSH I/O Server implements the SSH-2 version of the protocol, and supports remote command execution and the SCP protocol for bidirectional file transfer. It uses HSYCO data points to execute commands and return command status, making it easy to use the SSH protocol in EVENTS, as well as JavaScript and Java.

The Tecnoalarm TP16-256, TP8-64BUS, TP8-96VIDEO, TP8-96GSM, TP16-512GSM, TP8-88, TP20-440, EV10-50 and EV12-150 are advanced, multi-area security systems integrated with a variety of wired and wireless sensors. The integration with HSYCO can be accomplished with a TCP/IP network connection.

The Tecnofire TFA1-298,TFA2-569 and TFA4-1192 are advanced, fire detection systems. Panel’s firmware version 1.3.17 or above is required. TFNET firmware version 1.2.02 or above is required. The integration with HSYCO is based on a TCP/IP network connection.

Teledata Olympia are multi-zone fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection using Teledata ONEconnect as gateway. ONEconnect gateway must be configured in Gateway / Printer Mode. This driver was developed following the MODBUS documentation “Documento Interfacciamento Modbus Antincendio Rev. 2.1”

This I/O Server allows you to implement a custom Telegram bot in HSYCO, for sending and receiving messages using the Telegram messaging service.

The Texecom Premier Elite control panels are advanced, multi-area security systems. The integration with HSYCO can be accomplished via RS-232 serial communication or via Ethernet connection. This I/O Server has been tested with firmware version V3.02.00LS2

The T-LAB Q is a multi-area security system with four different models: Quadrio, Small, Medium, Large. The integration with HSYCO can be accomplished via the proprietary TCP/IP protocol.

The TSEC MACS is a perimeter anti-intrusion system for rigid and semi-rigid metal fences. The integration with HSYCO can be accomplished via a standard TCP/IP connection through the TSEC MACS ETH interface. This I/O server was developed following the TSEC MACS API 1.1.0.

The Vaisala WXT520 is a small and lightweight transmitter that offers six weather parameters in one compact package. The HSYCO WXT520 driver supports the RS-232 and RS-485 serial interface version, with the ASCII automatic protocol on the WXT520.

VE.Direct is a simple, proprietary, communication protocol used in Victron Energy BlueSolar MPPT Charge 70/15 and the BMV-700 series battery monitors. Connect the VE.Direct port to HSYCO using the Victron Energy “VE.Direct to USB” interface cable.

The Vivaldi Giove FREENETMK2 is an in-wall stand alone amplifier for multiroom audio applications, in a 503-3 modules standard case, and RS-485 control port.

HSYCO integrates the 8Access system by Wolf Safety through USB or Ethernet connection.

This driver provides weather information and forecasts retrieved from OpenWeatherMap.

The Wyrestorm MX-0808-PP, MX-0606-PP and MX-0404-PP modules are matrix switchers that allow any of their HDMI inputs to be routed over distance to any combination of their display outputs via a single UTP cable. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the module.

XGen Connect is a multi-area security system. The integration with HSYCO can be accomplished via the proprietary TCP/IP protocol.

YamahaEc is TCP/IP protocol compatibile with various Yamaha amplifiers.

The Yamaha RX series is a collection of multi-source, multi-zone AV receiver/amplifier that can be integrated to work with external control systems and servers via ethernet connection. This I/O server has been tested on the following models: RX-V1067, RX-V2067, RX-V3067, RX-V777 and RXA-2030 SINTO DSP. It should be compatible as well with the following models: RX-A740, RX-A840, RX-A1040, RX-A2040, RX-A3040, RX-V677, RX-V1077, RX-V2077 and RX-V3077.